Characterization of Titanium -Niobium Alloys by Powder Metallurgy as Implant
Received Date: Oct 01, 2022 / Published Date: Oct 31, 2022
Abstract
In this study, Ti-(x) Nb (at. %) master alloys (x:10, 20 and 30) were fabricated following a standard powder metallurgy route and were sintered at 1200 ˚C for 6h, under 300 MPa by powder metallurgy method. Effect of the Nb concentration in Ti matrix and porosity level was examined experimentally. For metallographic examination, the alloys were analyzed by optical microscopy and energy dispersive spectrometry analysis. In addition, X-ray diffraction was performed on the alloys to determine which compound formed in the microstructure. The compression test was applied to the alloys to understand mechanical behaviours of the alloys. According to Nb concentration in Ti matrix, the β phase increased. Also, porosity level played a crucial role on the mechanical performance of the alloys.
Citation: Karakurt EM (2022) Characterization of Titanium -Niobium Alloys byPowder Metallurgy as Implant. J Powder Metall Min 6: 328.
Copyright: © 2022 Karakurt EM. This is an open-access article distributed underthe terms of the Creative Commons Attribution License, which permits unrestricteduse, distribution, and reproduction in any medium, provided the original author andsource are credited.
Share This Article
Recommended Journals
天美传媒 Access Journals
Article Usage
- Total views: 744
- [From(publication date): 0-2022 - Jan 10, 2025]
- Breakdown by view type
- HTML page views: 551
- PDF downloads: 193
