Our Group organises 3000+ Global Events every year across USA, Europe & Asia with support from 1000 more scientific Societies and Publishes 700+ 天美传媒 Access Journals which contains over 50000 eminent personalities, reputed scientists as editorial board members.
A SOFC CCHP system (Combined Cooling, Heat and Power) using renewable energy sources (biogas, sewage gas, landfill gas)
will be developed to achieve high efficiencies. While electrical power will be produced at very high efficiencies using a SOFC
(Solid Oxide Fuel Cell), the energy of the hot exhaust gas will be used to operate an absorption chiller system which provides a low
temperature coolant and its waste heat can be used for heating. The combined system allows the utilization of various renewable energy
sources and a high annual efficiency. Depending on the utilized fuel, which will be converted in the SOFC, different requirements
for the gas cleaning unit have to be taken into account. Due to the planned multi fuel ability of the system, an overall concept for
the gas cleaning and gas processing unit must be developed to achieve a high degree of standardization. The desulfurization of
biogas is essential for the successful operation of SOFCs. H2S is one of the main components in biogas. In order to feed a solid oxide
fuel cell, the contaminated gas has to be reduced to a certain degree. In this work, different parameters onto the desulfurization
performance of commercially available desulfurization adsorbents were investigated. H2S removal efficiency was monitored under
various operating conditions such as different temperatures, space velocities and inlet concentrations. The experience obtained from
these tests provides fundamental knowledge for further development activities for such systems. This includes the determination of
the useful power range for a product, the real dynamic of the system, the suitability of different fuels and their influence on the system
performance as well as potentials for process simplifications and useful data for adsorption tower design and process optimization.
Biography
Christof Weinlaender studied Chemical Engineering at Graz University of Technology, Austria. In 2014, he finished his Master’s thesis about liquid-liquid extraction at the Department of Chemical Engineering at Graz University of Technology. Since 2014, he is working at the Department of Thermal Engineering at Graz University of Technology as Assistant Project Scientist. Key areas of his interest are biofuels, adsorption processes and solid oxide fuel cells.
Relevant Topics
Peer Reviewed Journals
Make the best use of Scientific Research and information from our 700 + peer reviewed, 天美传媒 Access Journals